PZ Series Diaphragm Pumps For Zone Zero & ATEX Areas
Certified for ATEX Zone 0 and Zone 20 requirements
ARO metallic air operated diaphragm pump models complywith Zone 0 for gases and Zone 20 for dusts requirements. Theyhave been approved by an independent lab for the most stringentATEX requirements.
ARO is the only leading global AODD manufacturer with thiscertification. Zone 0 / 20 pumps are the safest choice foron-the-edge applications where higher risk may appearunexpectedly.
ATEX Zone 0/20 certified diaphragm pumps can be used in extremely hazardous applications. Selected models are available from 1/2” to 3-inch port sizes in aluminum, cast iron and stainless steel. ATEX diaphragm pumps are the safest choice for on-the-edge applications where higher risk may appear unexpectedly.
Available Models and Port Sizes
PZ05X-XXX-XXX-B (1/2”)
PZ10X-XXX-XXX (1”)
PZ15X-XXX-XXX (1-1/2”)
PZ20X-XXX-XXX-B (2”)
PZ30X-XXX-XXX-C (3”)
ATEX Zones
Hazardous areas are any location where there is risk of an explosion.The risk level of an explosion is determined by the frequency and durationof the occurrence of an explosive atmosphere.
Zone 0 / 20 This is an area in which an explosive atmosphere is present continuously for long periods of time or will frequently occur.
Zone 1 / 21 This is an area in which an explosive atmosphere is likely to occur occasionally in normal operation. It may exist because of repair, maintenance operations, or leakage.
Zone 2 / 22 This is a place in which an explosive atmosphere is not likely to occur in normal operation but, if it does occur, will persist for a short period only. These areas only become hazardous in case of an accident or some unusual operating condition.
Global (EN)
